SeaTeam System Integration Telemetry Module

titleWHISTL.gif (22558 bytes)


SeaTeam *System Integration Telemetry Module* The new SeaTeam is the real-time solution ADCP users have been looking for. The SeaTeam allows integration of multiple water property sensors with your ADCP, provides a telemetry link to shore, and also includes a receiving station and configurable software for a complete seafloor-to-desktop system. When keeping current counts...SeaTeam is the missing link that marine decision makers need. Now works with RDI ADCP to provide real-time telemetry and display of directional wave information.


For the Research Scientist, the Consultant, and Industry, the SeaTeam System Integration Telemetry Module offers unique advantages:

Sensor Inputs	STANDARD Digital 1 ADCP input, RS/422 serial, 9600 baud, with 12v DC to 48v DC for ADCP power 4 general-purpose inputs, RS/232 serial, up to 9600 baud, with switched 12v DC power for sensors Test/Monitor port, RS/232 serial, 9600 baud Analog 5 inputs, each 0-5 volts, 12 bit resolution, with 1 switched 12v DC power output OPTIONAL Digital RS-485 digital input to multiplex additional sensor Analog SeaPac programmable A/D board set 8-16 inputs Optional VF-4 boards for voltage to frequency conversion Inputs are frequency counters
Sensor Power	STANDARD Digital Multiple 12v DC at up to 1 Amp, switchable under program control Analog One 12v DC source at 1 Amp, switchable under program control
Telemetry	OPTIONAL Transceivers FreeWave 900 MHz Spread-Spectrum radio modem, 1 watt power output Cellular phone Satellite telephone Packet Radio Acoustic modem Antennas Directional YAGi Omni directional Optional 150 meter depth-rated housing Short housing (18 inches) for use in systems without external batteries
Power	STANDARD 12v, 50 Ah alkaline battery with DC/DC converter for 42v ADCP operation OPTIONAL External 12v lead-acid battery Solar collectors
Base Station	STANDARD WHISL SeaTeam Windows display and archiving software OPTIONAL PC FreeWave 900 MHz Spread-Spectrum radio modem (works with Wave ADCP) with antenna and cable Other telemetry links, including land or cellular telephone, satellite cellular phone or direct internet connection
Optional	STANDARD 150 meter depth-rated housing Short housing (18 inches) for use in systems without internal battery


Mechanical:
Size:		8 inches o.d. by 27 inches long
Weight:		In air, 17 lb. In water, 14 lb.
Housing:		Submersible
Depth rating:		100 meters


Connectors
Standard
		Waterproof and pressure proof
Power:		Impulse VSG-3-PBCLM with mating cable connector and dummy plug, not wet pluggable
ADCP:		Impulse LPM-BH-7-MP with mating dummy plug, wet pluggable
Sensor:		Brantner 6-segment "pie" connector, P/N ANQ-7/42S-BC, 7 pins per segment, with mating cable connector and 6 dummy plugs, wet pluggable
RF:		DG O'Brien Coaxial bulkhead connector with mating cable connector and 10-foot RF antenna cable, not wet pluggable


Oceanography & Measurement Systems
Aquatic Environmental Assessment
Coastal Sciences, Engineering & Planning

For more information please call or e-mail the Senior Scientist & Senior Oceanographer: Bruce A. Magnell at (508) 495-6223 bmagnell@whgrp.com or the Vice President of Business Development Bob Hamilton at (508) 495-6229 bhamilton@whgrp.com


	Woods Hole Group *Marine Environmental Solutions* 81 Technology Park Drive, East Falmouth, MA 02536 Tel: 508-540-8080 Fax:508-540-1001 © 2002-2003, Woods Hole Group, Inc.