| SeaPac
2200
Waveand Tide Gauge The SeaPac 2200 Wave and Tide Gauge was designed for the precise measurement of wave height and period as well as water level in the difficult coastal ocean environment. For the Research Scientist, the Consultant, and Industry, the SeaPac 2200 offers unique advantages: |
 |
| Versatile |
4 Mbyte recorder and 50 Ahr battery pack allow longer deployments Extra input channels (analog and digital) for interfacing a wide variety of other sensor types |
| Accurate |
- 0.015% FS accuracy (1 cm for 100 psi w/ temperature compensation) - 0.0015% FS resolution (1 mm for 100 psi range) |
| Easy to Use |
Output in ASCII Hex or engineering units Removable memory pack allows quick re- deployment |
| Data Analysis | Optional WavePro Software provides fast analysis and presentation of your data using the MATLAB environment. |
| SENSORS: | |
| Temperature | |
| Sensor | Paroscientific temperature sensor (located inside the pressure sensor) |
| Range | 0 to 35o C |
| Accuracy | +/-0.1o C |
| Resolution | 0.01o C |
| Pressure | |
| Sensor | Paroscientific DigiQuartz sensor |
| Range | 100 psi (other ranges available) |
| Accuracy | +/-0.015% FS = 1 cm w/100 psi range |
| Resolution | 0.0015% FS (24 bits) |
| Data Storage | |
| Medium | Non-volatile flash PCMCIA card |
| Capacity | Typically 20 Mbyte, 6,000,000 - 24 bit pressure samples, expandable to 170 Mbyte |
| Retrieval | Stand-alone RS-232, 300 to 19200 baud directly, w/16 command instruction set; OR transfer memory card to computer and the data will appear as a single MS-DOS file called flashpac.dat, then export the data to computer hard disk. NO wait for data offload! |
| Data Security | CRC error checking, overwrite protection |
| Timebase | |
| Crystal | 2.097152 MHz GT-cut quartz crystal/real-time clock |
| Stability | +/-1 ppm over 0o C to +40o C |
| Accuracy | +/-30 seconds/year |
| Burst Sampling | |
| Burst Interval | Continuous, 1 min. to 24 hours |
| Scans/Burst | 8 to 4096 scans (multiples of 8) |
| ntegration Period | 0.25, 0.5, 1, 2, 4 seconds |
| Tide Intergration Period | off, 3.75, 7.5 or 15 minutes |
| Power | |
| Method | SPB-50, 5 section, 50 Ahr Alkaline battery pack |
| Life | 5000 hours of continuous operation |
| Pressure Case | |
| Material | 6061-T6 aluminum (stainless steel, titanium, and plastic optional) |
| Finish | Hard-coated and anodized |
| Size | 11.5 cm O.D. x 86 cm long |
| Weight | 15 kgs in air |
| Real-Time Options | |
| Direct cable up to 6 miles | |
| UHF/VHF packet radio/modem line-of-sight to 17 miles | |
| Cellular telephone - MNP10 error-free protocol | |
| Multiple instruments on one telemetry link | |
| Oceanography & Measurement Systems |  |
| Aquatic Environmental Assessment |  |
| Coastal Sciences, Engineering & Planning |  |
|
|
|
| For more information please call or e-mail the
Senior Scientist & Senior Oceanographer: Bruce A. Magnell at (508) 495-6223 bmagnell@whgrp.com or the Vice President of Business Development Bob Hamilton at (508) 495-6229 bhamilton@whgrp.com |
 |
 |
 |
 |
 |
 |
Woods
Hole Group
Marine Environmental Solutions 81 Technology Park Drive, East Falmouth, MA 02536 Tel: 508-540-8080 Fax:508-540-1001 © 2002-2003, Woods Hole Group, Inc. |